Bryston B135³



33.300,00 lei
cu TVA

Amplificator integrat stereo Bryston B135³


Culoare

Cantitate
In stoc

  • Livrare asigurata Livrare asigurata
  • Livrare gratuita in 24 ore, in masura stocului disponibil Livrare gratuita in 24 ore, in masura stocului disponibil
  • Policita de retur: 14 zile drept de retur pentru persoane fizice, conform legilor in vigoare Policita de retur: 14 zile drept de retur pentru persoane fizice, conform legilor in vigoare

Bryston B135 SST2 Integrated Amplifier este fara indoiala cel mai transparent din punct de vedere sonor, si cel mai fiabil produs audio disponibil. Ofera nivele de performanta ce egaleaza cele mai rafinate componente audio separate.

 

Intrari: 6x RCA Single Ended Pairs, 2x RCA Single Ended Pairs (Record In, Power Amp In), 2x Optical (TOSLINK)*, 2x SPDIF (RCA)*

Iesiri: 2x RCA Single Ended Pairs (Record Out, Preamp Out), Speaker Terminals, 1/4 inch Headphone Jack

Control: RS-232 (DB9), AUX IR, 2x 12V Output Triggers.

 

Optiuni disponibile:

 

Telecomanda optionala BR2

Front plate negru sau argintiu

B-135P Amplificator integrat cu Phono MM

*B-135DA Amplificator integrat cu 4 intrari digitale

*B-135P/DA Amplificator integrat cu Phono MM si 4 intrari digitale

POWER AMPLIFIER SECTION:

POWER OUTPUT: Nominal: 135 watts/channel into 8 Ohm

Maximum: 165 Watts/channel at onset of clipping into 8 Ohm @ 1 KHz

1/8th max: 20.6 Watts per channel into 8 Ohm @ 1KHz

INPUT IMPEDANCE: 50K ohms single ended

SENSITIVITY: 1v = 100 Watts into 8 ohms (gain = 28.28 or 29dB)

DISTORTION: THD+noise: ‹ 0.005% 20Hz to 20kHz at 135 Watts into 8 ohms,

IMD: ‹ 0.005 60Hz + 7KHz mixed 4:1

NOISE: ›108dB below rated output (with 20Hz to 22KHz bandpass filter)

SLEW RATE: › 60 volts per microsecond

POWER BANDWIDTH: ‹1 Hz to over 100 kHz

DAMPING FACTOR: Over 500 at 20 Hz, ref. 8 ohms

PREAMPLIFIER SECTION:

FREQUENCY RESPONSE: 20Hz to 20KHz, ±.05dB

IMD OR THD: ‹.003%

HIGH LEVEL SENSITIVITY: 500mV

NOISE: 100dB @ 20Hz to 20KHz (ref: 1V input)

GENERAL:

POWER CONSUMPTION: Maximum: 609 Watts (both channels at onset of clipping)

Standby:

@ 100VAC line voltage ˜ .85Watts

@ 120VAC line voltage ˜ .98Watts

@ 220VAC line voltage ˜ 1.8Watts

@ 240VAC line voltage ˜ 2.0Watts

SHUT DOWN VOLTAGE: When line voltage drops below these levels the amplifier will automatically shut down.

100VAC models ˜ 78 VACshutdown

120VAC models ˜ 81 VACshutdown

220VAC models ˜ 190 VACshutdown

240VAC models ˜ 195 VACshutdown

HEAT LOAD:

At maximum output power, both channels driven at 160WOUT ˜ 986btu/hr

At 1/8th output power, both channels driven at 20WOUT ˜ 594btu/hr

Standby mode:

for 120VAC models ˜ 3.35 btu/hr

for 220VAC models ˜ 6.83 btu/hr

DIMENSIONS: 17” or 19” wide X 4.55” high X 14” deep

(433 or 483mm X 116mm X 353mm)

WEIGHT: 13.6kg

BRYSTONB1353
11 Produse

Referinte specifice

Nicio recenzie pana in acest moment.

Scrie o recenzie

Bryston B135³

Amplificator integrat stereo Bryston B135³

Scrie o recenzie

Produse complementare